Drag 2 177W with UFORCE T2 Kit
If you like fresh psychedelic designs with character and grace, then the VOOPOO Drag 2 177W TC Starter Kit with UFORCE T2 Sub-Ohm Tank is the kit for you.
GENE FIT Chipset with Multiple Power Output Modes
Updated Chassis to Pair with the UFORCE T2 Sub-Ohm Tank
Unique Resin Elements - Making Each Device Pattern Unique with no two patterns the same
Multiple Safety Protections
UFORCE OCC Coil Technology
Quick Vent Channel Design - Rapid Heat Discharge
With an upgrade from the original Drag Box Mod and an all new tank is the magnificently designed VOOPOO Drag 2 177W TC Starter Kit with UFORCE T2 Sub-Ohm Tank. The Drag 2 Box Mod is offered with a completely fresh set of uniquely colored Resin panels and matching drip tips to applaud the mods classy Zinc Alloy construction. This mod has more compact dimensions than the original, coming in at 88.3mm x 26.5mm x 51mm and lighter weight of 158g.
The back panel is connected by powerful magnets for placing twin 18650 batteries (not included) into your Drag 2 Box Mod. To charge your batteries, VOOPOO has given this device the industry standard Micro-USB port that can also be used for upgrading firmware.
These batteries power an advanced 32-bit GENE FIT Chip with high-performance technology and a V0 class fireproofing bridge that protects from dust and liquid. One of the many features this new chip is capable of is suggesting the output settings according to your attached sub-ohm tank and coil.
Along one side of the mod sits the 3-button control with one oversized firing button and two up/down adjustment buttons. Dividing the firing button from the adjustment buttons is a large OLED display screen that shows your current mode, resistance, voltage, and battery life. While power mode allows for a variable wattage of 5-177W, Temperature Control allows for 200-600F (100-315C) and heating elements of Ni200, Titanium, and Stainless Steel. VOOPOO has also made available distinct modes such as battery set, flavor set, and cloud set as well as TCR adjustments.
Other specs include an output voltage of 0.0-7.5V, an output current of 0-40A, useful resistances of 0.05-5.0 ohm, and a resting current of less than 10uA. With a five-bank memory, you can save all your detailed personal settings in the Drag 2 and dodge the hassle of adjusting them every time you vape.
Safety features of the Drag 2 include overcharge protection, over discharge protection, short-circuit protection, over-temperature protection, reverse polarity protection, and a ten-second cutoff.
Attached to the VOOPOO Drag 2 177W TC Box Mod by a Gold-plated threaded 510 connection is the UFORCE T2 Sub-Ohm Tank.
This sleek looking tank is made of superior Stainless Steel and durable Pyrex glass with dimensions of 54.45mm x 28mm and a lightweight of 59.29g.On top of the UFORCE U2 Tank is a specially designed 14mm wide-bore Resin drip tip that matches the Resin panels of the Drag 2 mod. On the base of the tank are triple adjustable airflow slots that give you a wide variety of airflow options.
VOOPOO has given this tank convenient top filling with a push to open top cap to expose a leak-proof filling port. The UFORCE U2 comes with a bubble glass tube with a 5mL capacity as well as a conventional glass tube with a 3.5mL e-liquid capacity. Aside from those two glass tubes, VOOPOO has made this tank compatible with their 2mL, 5.5mL, and 8mL replacement tubes.
Offering even more versatility, this tank employs OCC coil technology, making it compatible with all UFORCE coil heads.
Pre-installed inside the tank is the UFORCE U2 0.4 ohm coil head considered for use between 40-80W but is favored for best use at 55-65W.
This excellent coil head has vertically oriented dual macro Kanthal coils that produce massive clouds with exceptional flavor.
With this kit, VOOPOO has included the UFORCE N3 coil head with 0.2-ohm triple mesh coils considered for use between 65-100W favored for best use at 75-85W. At these larger wattages, the UFORCE N3 maintains savory flavor while producing even more massive clouds.
Supporting with flavor enhancement and cloud production the UFORCE T2’s short chimney brings you closer to the vapor you beg.
DRAG 2 MOD SPECS:
- 88.3mm x 51mm x 26.5mm (L x W x H)
- Dual High Amp 18650 Batteries - NOT INCLUDED
- Wattage Output Range: 5-177W
- Voltage Output Range: 0 - 7.5V
- Resistance Range
- POWER MODE -- 0.05-3.0OHM
- TC MODE -- 0.05 - 1.0OHM
- Temperature Range: 200-600°F
- Supports Ni200, Titanium, Stainless Steel Compatibility
- TCR Adjustment Modes
- Additional Modes
- Battery Set
- Flavor Set
- Cloud Set
- Output Over-Current Protection
- Overcharge Protection
- Over-Discharge Protection
- Short-Circuit Protection
- Over Temperature Protection
- Brand Reverse Protection
- Switch Timeout Protection - 10 Seconds
UFORCE T2 SPECS:
- 25mm Tank Diameter
- 28mm At Widest Point
- 3.5mL Standard Juice Capacity
- 8mL Maximum Juice Capacity
- Superior 304 Stainless Steel Construction
- Pyrex Glass Reinforcement
- Quick Vent Channel Design - Rapid Heat Discharge
- Short Chimney - Flavor-Focused
- UFORCE OCC Coil Technology
- 0.4ohm U2 Dual Coil - rated for 40-80W
- 0.2ohm N3 Triple Mesh Coil - rated for 65-100W
- Top-Fill Method
- Triple Auxilary Bottom Airflow Control